VNA GUI reference
R&S
®
ZNL/ZNLE
512
User Manual 1178.5966.02 ─ 19
Log Errors
Enables the transfer of error messages for external devices to the error log
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\log\Error.log
.
Remote command:
n/a
10.12.3.2
Cal Power Config dialog
The "Cal Power Config" dialog adjusts the target power for the power calibration (cal
power) and defines the target power for the reference receiver calibration. These set-
tings are particularly important for test setups involving external attenuators or amplifi-
ers.
Access:
[Cal] > "Pwr Cal Settings" > "Cal Power..."
The diagram in the center of the dialog visualizes the settings and results below.
Port Cal Power
Allows you to define (port-specific) power levels for source power calibrations.
Port Overview ← Port Cal Power
The dialog shows all source ports of the network analyzer. Each port is displayed with
the current "Power Result" at the input of the DUT (in dBm) and offset (i.e. the "Cal
Power Offet" in dB).
Cal softtool