VNA GUI reference
R&S
®
ZNL/ZNLE
393
User Manual 1178.5966.02 ─ 19
10.6.11.3
Select Parameter dialog
The "Select Parameter" dialog provides a selection of measurement results (e.g. S-
parameters) or traces, e.g. for trace import, import of power correction coefficients, limit
line import.
Access:
The dialog may be called from several dialogs, for example on pressing
.
Select All / Deselect All
During trace data import, selects/deselects all traces contained in the opened trace file.
Auto Distribute
Available for trace data import only.
If checked, a selected trace S
ij
is imported as a memory trace for all data traces in the
current channel setup that are measuring S
ij
.
Remote command:
10.6.11.4
Select Ports dialog
The "Select Ports" dialog defines the port assignment for the created Touchstone
(
*.s<n>p
) file.
Access:
[Trace] > "Trace Data" > "snp Free Config..."
Touchstone files and file export
Note the conditions described in
"Conditions for Touchstone file export"
Trace softtool
