General instrument setup
R&S
®
ZNL/ZNLE
141
User Manual 1178.5966.02 ─ 19
Independent of the state of the "Show Cal Kit Label" flag, cal kit labels are displayed in
several other manual calibration dialogs.
Delete Cal Pool / Delete All Cal Kits
Deletes all calibration data and all cal kit data. See
Chapter 10.12.4.3, "Calibration
Remote command:
n/a
Search Path for additional Cal Kits and Connector Types
Contains the name and path of a special directory for cal kit files (
*.calkit
). All cal
kit files in the special directory are loaded automatically as predefined kits (i.e. read-
only kits which cannot be modified) every time the VNA application is started. It is pos-
sible to select the default cal kit directory
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\Kits
or
any other directory. "None" means that no additional cal kit files are loaded on start-up.
Use the special directory to make sure that you do not have to import kits manually,
even after terminating the VNA application improperly. In this case, previously imported
cal kit files are not stored in the channel setup file.
Remote command:
7.6.2
User Interface tab
Provides general user interface configurations.
Sounds
Switches the sounds generated by the analyzer GUI on or off. Sounds are generated
for certain GUI events, when the analyzer generates a notice, status or warning mes-
sage (alarm sounds) or during calibration.
VNA setup
