R&S ZNH, Руководство пользователя

Страница: 147 / 369

Cable and Antenna Test Mode
R&S
®
ZNH
140 User Manual 1334.5985.02 ─ 02
1. Select the marker you want to delete in the Measurement Result View .
Alternatively, select the "Select Marker" softkey to select the marker you want to
delete.
2. Select the "Delete Marker" softkey.
The R&S ZNH opens a submenu to select the marker deletion.
3. Select the "Delete Selected" menu item.
The R&S ZNH deletes the marker.
Removing delta markers only
1. Press the [MARKER] key.
2. Select the "Delete Marker" softkey.
The R&S ZNH opens a submenu to select the marker deletion.
3. Select the "Delete All Delta" menu item.
The R&S ZNH deletes all delta markers.
Removing all markers at the same time.
Special touchscreen gesture
Draw an "X" on the trace window to delete all markers and delta markers on the trace
window.
See
Chapter 5.1.6, "Delete All Markers" , on page 74.
1. Press the [MARKER] key.
2. Select the "Delete Marker" softkey.
The R&S ZNH opens a submenu to select the marker deletion.
3. Select the "Delete All" menu item.
The R&S ZNH deletes all markers and delta markers.
Using Marker Search Limits
The R&S ZNH allows you to use only a limited section of the trace for the marker auto-
matic positioning functions. See "Automatic Positioning of Markers" on page 139. The
R&S ZNH provides setting to define two search range limits.
1. Press the [MARKER] key.
2. Select the "Set Marker" softkey.
The R&S ZNH opens a submenu to select the marker positioning.
3. Select the "Search Range" menu item.
The R&S ZNH opens the marker search limits softkey menu.
4. Select "Search Range 1" or "Search Range 2" softkey to define the two search
range limit respectively.
Analyzing Measurement Results