Command Reference
R&S
®
ZNC
672
User Manual 1173.9557.02 ─ 13
Example:
*RST; :SWE:POIN 20
Create a trace with 20 sweep points, making the created trace the
active trace of channel 1 (omitted optional mnemonic
SENSe1
).
TRAC:COPY "Mem_Pt20",CH1DATA
Copy the current state of the created trace to a memory trace
named "Mem_Pt20". The memory trace is not displayed.
DISP:WIND:TRAC2:FEED "MEM_PT20"
Display the created memory trace in the active diagram area (dia-
gram area no. 1).
Usage:
Setting only
Manual operation:
See
TRACe:COPY:MATH
<MemTraceName>, <DataTraceName>
Copies a mathematical trace to a memory trace. The trace to be copied can be specified
by two alternative methods:
●
As the active mathematical trace of channels 1 to 4 (CH1DATA, CH2DATA,
CH3DATA, CH4DATA)
●
As a trace with a name (string variable).
The created memory trace can be specified as follows:
●
As the memory trace named
Mem<n>[Trc<m>]
, where n = 1, ... 8 and
Trc<m>
is
the name of the copied data trace (
MDATA1, MDATA2, MDATA3, MDATA4,
MDATA5, MDATA6, MDATA7, MDATA8
).
●
As a memory trace with an arbitrary name (string variable).
An existing memory trace with the same name is overwritten.
Note:
To copy a data trace which is not modified by any mathematical operations, use
Setting parameters:
<MemTraceName>
Name of the memory trace (see also
).
Range:
<memory_trace> is either a string variable (enclosed
in single or double quotes) or one of the following
reserved names (no string variables):MDATA1 |
MDATA2 | MDATA3 | MDATA4 | MDATA5 | MDATA6
| MDATA7 | MDATA8 (only for memory traces
Mem<n>[Trc<m>], where n = 1, ... 8).
<DataTraceName>
Name of the data trace (see also
).
Range:
<data_trace> is either a string variable (enclosed in
single or double quotes) or one of the following
reserved names (no string variables):CH1DATA |
CH2DATA | CH3DATA | CH4DATA (only for the
active data trace in channels Ch1, Ch2, Ch3, Ch4).
SCPI Command Reference
