R&S ZNC3, Руководство пользователя

Страница: 124 / 795

GUI Reference
R&S
®
ZNC
108 User Manual 1173.9557.02 ─ 13
Save
Saves and names the active recall set. The analyzer opens a dialog box to select a recall
set file name (
*.znx
) and location for the recall set file.
Remote command:
​
MMEMory:
​
STORe:
​
STATe
​
Save dialog
Specifies the name and location of a particular file (e.g. a VNA recall set file) to save:
●
"Look in:" specifies the drive and directory in which the data is stored. The icons to
the right of the pull-down list are provided for easy navigation in the file system (place
the cursor on the icons to obtain "What's this?" help).
●
"File name:" specifies a file name to save the current data (e.g. the recall set). The
analyzer adds the extension (e.g.
*.znx
) in the "Files of type:" field.
●
"Files of type:" selects a particular file type (e.g. recall set files, *.znx) for the created
file.
●
"Save" saves the data (e.g. the active recall set) in the selected file and directory and
closes the dialog.
●
"Cancel" closes the dialog without saving the data.
●
"Windows Explorer" opens the selected directory in Windows Explorer.
Tip: The "Save" dialog is used to store various data types (e.g. cal kit data, limit lines,
sweep segment lists, ...). Depending on its use the dialog is opened with different file
locations and file type filters. File locations (directories) are remembered when the dialog
is closed. To restore default directories use the "Presets" tab of the "SYSTEM > SETUP
> Setup > System Config" dialog. See
​
chapter 4.6.2.1, "Presets" , on page 309.
Recent Files
The buttons are labelled with the last recall sets which were stored in the current or in
previous sessions. They open the corresponding recall set.
File Settings