R&S VTE, Начало работы

Страница: 41 / 52

Operating the R&S VTE in a LAN
R&S
®
VTE
41 Getting Started 2116.1270.02 ─ 07
The serial number consists of 6 digits and is printed on the cabinet of the
R&S VTE.
Networks without DHCP Server
In networks that assign fixed IP addresses, the network administrator usually con-
figures the network card. Contact your network administrator. The IP address is
set using the firmware or the Windows
7 Start menu (for details refer to the Win-
dows 7 documentation).
Entering the IP address using the firmware
1. In the toolbar, tap .
2. On the "System" tab, under "LAN Services", select the "IP Addresses" field.
3. Enter the IP address.
6.5 Firewall Settings
By default, the Windows Firewall is activated to protect the R&S VTE from an
attack of hostile users and programs. The Windows Firewall suppresses all net-
work communication which is not initialized by the R&S
VTE itself or which is not
defined as an exception.
To enable data transfer or to allow access to the R&S VTE, define exceptions
using the Windows 7 Start menu. For details refer to the Windows 7 documenta-
tion or contact your network administrator for support.
Firewall Settings