Option Concept
R&S
®
TSMA6
18
User Manual 4900.8057.02 ─ 06
4.2
Band Options
The R&S
TSMA6 hardware simultaneously measures in all wireless communications
bands from 350 MHz to 6 GHz. Using band licenses, more cost-efficient configurations
are available for applications where only a limited number of bands need to be mea-
sured simultaneously. These configurations limit the number of bands that can be mea-
sured in parallel. You can reconfigure the bands for each measurement as desired.
Upgrade options are available to increase the bandwidth of the R&S
TSMA6 from a
limited number of bands to full bandwidth.
Following band options are available:
Table 4-2: Available R&S
TSMA6 band options
Option
Order Number
Description
R&S
TSMA6-KAB
4901.0708.02
All bands measured simultaneously
R&S
TSMA6-K1B
4901.0695.02
1 band measured simultaneously
R&S
TSMA6-K2B
4901.0689.02
2 bands measured simultaneously
R&S
TSMA6-K3B
4901.0672.02
3 bands measured simultaneously
R&S
TSMA6-K4B
4901.0666.02
4 bands measured simultaneously
R&S
TSMA6-K5B
4901.0650.02
5 bands measured simultaneously
R&S
TSMA6-KUB
4901.0950.02
Upgrade: 1 additional band measured simultaneously
4.3
R&S NESTOR Options
The R&S NESTOR options are preinstalled on the R&S
TSMA6, if the R&S NESTOR
application is ordered within the TSMA6 KMAT.
A later installation of additional R&S NESTOR options can be done via the
R&S
on page 131) or via the License
Key Manager. In this case, you have to order option-specific NESTOR license keys.
Therefore, the serial number of R&S NESTOR, which available on the product label, is
required.
4.4
R&S ROMES Options
A later enhancement of the R&S
TSMA6 with the R&S ROMES application requires a
USB license dongle including the ROMES options.
R&S ROMES licenses are shipped with a USB dongle. Accompanied with the dongle,
there is a license key file matching with the dongle.
This license key file has to be copied as a post process after software installation (see
R&S ROMES Options
