R&S SMW200A, Начало работы

Страница: 102 / 118

Instrument Control
R&S
®
SMW200A
102 Getting Started 1412.9220.02 ─ 21
Legend Item Description
3 Control signal block Indicates information on the control signals like signal
content, input or output and provides quick access to the
corresponding configuration dialog.
A dedicated control block is displayed for each baseband
(3a) and RF block (3b).
4, 6 Signal lines (digital/ ana-
log)
Show the currently configured signal flow.
●
Thick lines represent the digital I/Q streams, see (4)
in the figure above
●
Thin lines represent the analog signals (6)
5 Graphics indicator Denotes that the signal is displayed graphically (5a/5b).
7 Connector icons Represent the interfaces for signal input and output.
●
RF signal connector output (7a); (icons vary depend-
ing on the frequency)
●
Analog I/Q signal connector input (7b)
●
Analog I/Q signal connector output (7c)
●
Digital I/Q signal connector input (7d)
●
Digital I/Q signal connector output (7e)
8 Stream indicators Show the input streams at the I/Q stream mapper.
9 Stream status indicators Show the status of a stream (On/Off)
10 Stream indicators
Indicates the output streams that are routed to the corre-
sponding connectors, and the way the streams are inter-
nally processed:
●
Single
One stream mapped on the connector (9a).
●
Add
More than one stream is routed to a connector (9b).
8.3.3 Taskbar
The "Taskbar" contains labeled softkeys and minimized views (thumbnails) of
active graphics and dialogs.
Initially, it shows the permanently assigned softkeys. The softkey with the sine
wave denotes that no signal is activated for graphical representation.
Figure 8-2: Taskbar in default state
Understanding the Display Information