Remote-Control Commands
Satellite Navigation
338
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:NMESsage:INAV:E5BHS
<HsE5b>
Sets the signal health status - E5b
HS
parameter.
Parameters:
<HsE5b>
integer
Range:
-1 to 1
*RST:
0
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:NMESsage:NAV:EPHemeris:
SEType
<SatType>
Sets the satellite ephemeris type - M parameter.
Parameters:
<SatType>
GLO | GLOM
*RST:
GLOM
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:NMESsage:NAV:EPHemeris:P
<P>
Sets the satellite operation mode - P parameter.
Parameters:
<P>
integer
Range:
0 to 3
*RST:
0
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:NMESsage:NAV:EPHemeris:
AOEP
<AgeOfEphemeris>
Sets the age of ephemeris page - P1 parameter.
Parameters:
<AgeOfEphemeris>
A30M | A45M | A60M
*RST:
A30M
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:NMESsage:NAV:EPHemeris:
TALignment
<TbAlignment>
Sets the t
b
alignment - P2.
Parameters:
<TbAlignment>
EVEN | ODD
*RST:
EVEN
Navigation Message Configuration