Getting Started
Satellite Navigation
33
User Manual 1178.6379.02 ─ 01
For static receivers, the value resumes the value of the parameter "Position Configura-
tion" >
Location, Start LocationLocation
.
For moving receivers, the receiver position specified as "Position Configuration" >
is the initial location of the receiver. The current receiver's location is retrieved
from the waypoints file as function of the time.
Current position is indicated in the
.
Speed ← Real-time information
Indicates the speed of a moving receiver.
Applies for moving receivers with specified velocity value in the movement description
file.
Attitude ← Real-time information
Displays the receiver attitude parameters yaw/heading (Y), pitch/elevation (P), roll/
bank (R) in degrees.
The initial receiver attitude parameters are selected in the "Localization Data" dialog.
Power View > Signal Selection
Defines the signals to be visualized on the "Power View" graph.
Useful in hybrid configurations and for limiting the displayed information to, for exam-
ple, one GNSS system.
Power View > Echoes
If enabled, the "Power View" indicates also the echoes per SV.
Echoes are generated if static multipath with at least one echo is enabled, see
See also
.
Map Viewer > Axis
Changes the axis type in the
Simulation Monitor