Remote-Control Commands
Satellite Navigation
228
User Manual 1178.6379.02 ─ 01
Parameters:
<Location>
"User Defined" | "New York" | "San Francisco" | "Beijing" |
"New Delhi" | "Seoul" | "Singapore" | "Taipei" | "Tokyo" |
"Sydney" | "London" | "Moscow" | "Munich" | "Paris"
User Defined
Enables the definition of the "Latitude", "Longitude" and "Alti-
tude" of the GNSS receiver with fixed position in the ECEF
WGS84 coordinate system.
"New York" | "San Francisco" | "Beijing" | "New Delhi" |
"Seoul" | "Singapore" | "Taipei" | "Tokyo" | "Sydney" | "Lon-
don" | "Moscow" | "Munich" | "Paris"
Selects one of the predefined fixed geographic locations.
The parameters latitude, longitude and altitude are set according
to the selected position.
Example:
See
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:RFRame
<ReferenceFrame>
Select the reference frame used to define the receiver coordinates.
Parameters:
<ReferenceFrame>
PZ90 | WGS84
*RST:
WSG84
Example:
See
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:FORMat
<PositionFormat>
Sets the format in which the latitude and longitude are set.
Parameters:
<PositionFormat>
DMS | DECimal
*RST:
DMS
Example:
See
Manual operation:
See
"Location Coordinates, Position Format"
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:DECimal:
PZ
<Longitude>, <Latitude>, <Altitude>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:DECimal[:
WGS]
<Longitude>, <Latitude>, <Altitude>
Defines the coordinates of the geographic location of the GNSS receiver in decimal for-
mat.
Receiver Positioning Configuration Commands