SBAS Corrections
Satellite Navigation
159
User Manual 1178.6379.02 ─ 01
13.4.4 Additional SBAS System Parameters
Access:
1. Select "System Configuration > Systems&Signals > SBAS (e.g. EGNOS) > On".
2. Select "Satellites > SBAS > Error Correction Mode > Replay Historical Data (and
Sync Atmosphere & SV Errors)".
3. Select "SV# > SV Config > Signals Configuration".
4. Select "Nav Msg Control > Edit".
5. Select "Nav Msg Content > Config" >
"System Parameters"
> "Message Sched-
ule".
In this dialog, you select which SBAS messages are generated.
6. Select "System Parameters > Issue of Data".
SBAS Settings