R&S SMJ100A, Руководство по эксплуатации, Страница: 773 / 874

Remote Control Commands
R&S
®
SMJ100A
757 Operating Manual 1403.7458.32 ─ 14
Return values:
<Points> integer
Range:
0 to INT_MAX
*RST: 0
Example: LIST:SEL 'D:\user\list3'
selects
list3
for editing. The R&S SMJ generates a new file
automatically, if it does not exist yet.
LIST:POW:POIN?
queries the number of levels in the list file
Response:
327
Usage: Query only
[:SOURce<hw>]:LIST:RESet
Resets the list to the starting point.
Example: LIST:RES
resets the list to the starting point.
Usage: Event
Manual operation: See "Reset - List Mode" on page 275
[:SOURce<hw>]:LIST:SELect <Filename>
Selects the specified list. If a new list is to be created, the name can be entered here.
The list is created if it does not yet exist. The list selected here is available for the fur-
ther processing steps (editing) and is used in the instrument when the list mode is acti-
vated.
The files are stored with the fixed file extensions
*.lsw
in a directory of the user's
choice. The directory applicable to the command is defined with the command
MMEMory:CDIR
. A path can also be specified in which case the list mode file in the
specified directory is selected.
*RST
does not affect data lists.
Parameters:
<Filename> '<list name>'
Example: LIST:SEL 'D:\user\list3'
selects
list3
for editing.
Manual operation: See "List Mode Data... - List Mode" on page 277
[:SOURce<hw>]:LIST:TRIGger:EXECute
Starts the processing of a list in list mode. It corresponds to the manual-control com-
mand "Execute Single."
SOURce Subsystem