R&S SMJ100A, Руководство по эксплуатации

Страница: 681 / 874

Remote Control Commands
R&S
®
SMJ100A
665 Operating Manual 1403.7458.32 ─ 14
Manual operation: See "Save/Recall" on page 341
[:SOURce<hw>]:BB:DM:SETTing:STORe:FAST <Fast>
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
<Fast> 0 | 1 | OFF | ON
*RST:
1
Manual operation: See "Fast Save" on page 160
[:SOURce<hw>]:BB:DM:STANdard:ULISt:CATalog?
Reads out the files with Digital Standard settings in the default directory. The default
directory is set using command
MMEM:CDIRectory
. Only files with the file extension
*.dm_stu
will be listed.
Return values:
<Catalog> string
Example: MMEM:CDIR 'D:\user\dig_mod'
sets the default directory.
BB:DM:STAN:ULIS:CAT?
reads out all the files with Digital Standard settings in the default
directory.
Response:
'DM_QAM'
the file
DM_QAM
with Digital Standard settings is available.
Usage: Query only
Manual operation: See "Save/Recall User" on page 345
[:SOURce<hw>]:BB:DM:STANdard:ULISt:DELete <Filename>
Deletes the selected file with Digital Standard settings. The directory is set using com-
mand
MMEM:CDIRectory
. A path can also be specified, in which case the files in the
specified directory are read. The file extension may be omitted. Only files with the file
extension
*.dm_stu
will be deleted.
Setting parameters:
<Filename> string
Example: BB:DM:STAN:ULIS:DEL 'DM_QAM'
deletes file 'DM_QAM'.
Usage: Setting only
SOURce Subsystem