R&S SMJ100A, Руководство по эксплуатации, Страница: 674 / 874

Remote Control Commands
R&S
®
SMJ100A
658 Operating Manual 1403.7458.32 ─ 14
Example: BB:DM:CLIS:SEL 'c_list1'
selects the control list.
BB:DM:CLIS:DATA 0,0,0,0,8,8,8,0,0,0,0...
enters the control values in list c_list1. In the example, only
ramps for marker 4 are set.
Usage: Setting only
Manual operation: See "Edit Control List" on page 356
[:SOURce<hw>]:BB:DM:CLISt:DELete <Filename>
The command deletes the specified control list from the default directory. The default
directory is set using command
MMEM:CDIRectory
. A path can also be specified, in
which case the files in the specified directory are deleted. The file extension may be
omitted. Only files with the file extension
*.dm_iqc
will be deleted.
Setting parameters:
<Filename> <list name>
Example: BB:DM:CLIS:DEL 'c_list3'
deletes control list c_list3.
Usage: Setting only
Manual operation: See "File Manager" on page 352
[:SOURce<hw>]:BB:DM:CLISt:POINts?
The command queries the number of lines (2 bytes) in the currently selected list.
Return values:
<Points> integer
Range:
0 to INT_MAX
*RST: 0
Example: BB:DM:CLIS:SEL "c_list1"
selects control list c_list1.
BB:DM:CLIS:POIN?
queries the number of lines in the control list.
Response:
20
the control list consists of 20 lines.
Usage: Query only
[:SOURce<hw>]:BB:DM:CLISt:SELect <Filename>
The command selects the control list in the default directory. The default directory is
set using command
MMEM:CDIRectory
. A path can also be specified, in which case
the files in the specified directory are selected. If a control list with the specified name
does not yet exist, it is created. The file extension may be omitted. Only files with the
file extension
*.dm_iqc
will be selected or created.
SOURce Subsystem