R&S SMJ100A, Руководство по эксплуатации

Страница: 672 / 874

Remote Control Commands
R&S
®
SMJ100A
656 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:DM:FLISt:FREE?
[:SOURce<hw>]:BB:DM:MLISt:FREE?
Queries the user modulation mapping list free memory.
Return values:
<Free> integer
Range:
0 to INT_MAX
*RST: 0
Example: BB:DM:FORM USER
selects the User modulation type.
BB:DM:FLIS:FREE?
queries the free memory.
Usage: Query only
[:SOURce<hw>]:BB:DM:CLISt:COPY <Filename>
[:SOURce<hw>]:BB:DM:DLISt:COPY <Filename>
The command copies the selected data list into the data list specified by <list name>. If
a data list with the specified name already exists, it is overwritten. If it does not yet
exist, it is created.
The source file has to be available in the default directory. The default directory is set
using command
MMEM:CDIRectory
. A path can be specified, in which case the
source file is copied into the file <list name> in the specified directory. The file exten-
sion may be omitted.
Only files with the file extension
*.dm_iqc
will be copied (see also Table 7-2 ).
Setting parameters:
<Filename> string
Example: BB:DM:DLIS 'd_list1'
selects data list
d_list1
.
BB:DM:DLIS:COPY 'd_list2'
copies the content of data list
d_list1
into data list
d_list2
.
Any existing content in data list
d_list2
is overwritten.
Usage: Setting only
Manual operation: See "File Manager" on page 352
[:SOURce<hw>]:BB:DM:CLISt:TAG?
[:SOURce<hw>]:BB:DM:DLISt:TAG?
The command queries the content of the specified tag in the selected file.
Return values:
<Tag> <control list>,<tag name>
SOURce Subsystem