R&S SMJ100A, Руководство по эксплуатации

Страница: 640 / 874

Remote Control Commands
R&S
®
SMJ100A
624 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Mode> IGNore | TAKE
IGNore
The marker information carried in the individual segment wave-
form files is not considered.
TAKE
The output waveform file contains the marker information as
configured in the individual waveform files.
*RST:
TAKE
Example: BB:ARB:WSEG:CONF:SEL 'ConfComm'
BB:ARB:WSEG:CONF:MARK:MODE TAKE
Manual operation: See "Segment Marker" on page 404
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:OFILe <OFile>
Defines the file name for the multi segment waveform. The file extension is
*.wv
.
Parameters:
<OFile> string
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'multi1'
creates the configuration file
multi1.inf_mswv
in default
directory.
BB:ARB:WSEG:CONF:OFIL 'mseg1_2'
defines the file name
mseg1_2.wv
for the multi segment wave-
form file created using configuration file
multi1.inf_mswv
.
Manual operation: See "Output file" on page 405
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
<Waveform>
Appends the specified waveform to the configuration file.
Setting parameters:
<Waveform> string
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file
new.inf_mswv
in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1'
appends waveform
arb1.wv
to configuration file
new
. Wave-
form
arb1
will be the first segment of a multi segment waveform
created with configuration file
new
.
Usage: Setting only
SOURce Subsystem