R&S SMJ100A, Руководство по эксплуатации, Страница: 632 / 874

Remote Control Commands
R&S
®
SMJ100A
616 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete <Filename>
Deletes the specified waveform file. If the file is not on the default path, the path must
be specified at the same time. The file extension may be omitted. Only files with the file
extension
*.wv
will be deleted.
Setting parameters:
<Filename> string
Example: BB:ARB:WAV:DEL 'D:\user\wave1.wv'
deletes waveform file
wave1.wv
.
Usage: Setting only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?
Queries the free disk space on the default path of the instrument's harddisk.
Return values:
<Free> integer
Range:
0 to INT_MAX
*RST: 1
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory
BB:ARB:WAV:FREE?
queries the free disk space in directory
Usage: Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:HDDStreaming:BLEVel?
Queries the filling level of the streaming buffer.
During normal operation, the streaming buffer level should have a value of 90% ..
100%. Buffer level around 0% indicates a buffer underrun and the signal processing
will be interrupted.
Adjustment in the parameter value or state usually results in short decreasing of the
streaming buffer level but this buffer state should not be mislead with buffer underrun.
Return values:
<BLevel> integer
Range:
0 to 100
*RST: 0
Example: BB:ARB:WAV:HDDS:STAT ON
enables HDD streaming.
BB:ARB:WAV:HDDS:BLEV?
queries the streaming buffer level.
Response: 94%
Usage: Query only
SOURce Subsystem