R&S SMJ100A, Руководство по эксплуатации

Страница: 620 / 874

Remote Control Commands
R&S
®
SMJ100A
604 Operating Manual 1403.7458.32 ─ 14
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name
mcar1_2.wv
for the multi carrier wave-
form.
BB:ARB:MCAR:CLO
creates multi carrier waveform
mcar1_2.wv
.
The new multi carrier waveform is loaded and digital standard
"ARB" is activated.
Usage: Event
Manual operation: See "Create and Load" on page 419
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CLOCk?
The command queries the resulting sample rate at which the multi carrier waveform is
output by the arbitrary waveform generator. The output clock rate depends on the num-
ber of carriers, carrier spacing and input sample rate of the leftmost or rightmost carri-
ers.
Return values:
<Clock> float
Range:
400 to Max
Increment: 1E-3
Example: BB:ARB:MCAR:CLOC?
queries the ARB multi carrier output clock rate.
Usage: Query only
Manual operation: See "Clock Rate" on page 418
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CREate
Creates a multi carrier waveform using the current settings of the carrier table. The
multi carrier waveform is saved into the file defined with command
SOUR:BB:ARB:MCAR:OFIL
. The file extension is
*.wv
.
Example: MMEM:CDIR 'D:\user\waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'multi_wv1'
defines the file name
multi_wv1.wv
for the multi carrier wave-
form.
BB:ARB:MCAR:CRE
creates multi carrier waveform
multi_wv1.wv
.
Usage: Event
Manual operation: See "Create" on page 419
SOURce Subsystem