R&S SMJ100A, Руководство по эксплуатации, Страница: 553 / 874

Remote Control Commands
R&S
®
SMJ100A
537 Operating Manual 1403.7458.32 ─ 14
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
Queries the month in the date part in the automatic file name.
Return values:
<Month> integer
Range:
1 to 12
*RST: 1
Example: HCOP:FILE:AUTO:MONT?
queries the month in the date part in the automatic file name.
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
Activates the usage of the month in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
1
Example: HCOP:FILE:AUTO:MONT:STAT OFF
deactivates the usage of the month in the automatic file name.
Manual operation: See "File Options" on page 155
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number in the automatic file name. The number is assigned in such a way
that always the lowest possible value for an unique file name within the selected path
is used.
On initially switching on the device the number will be reset to the lowest possible
value. Starting with number 0 the output directory will be scanned for already existing
files. As long as files with the same name are existing the number will be incremented
by 1. The number will be automatically set to a number so that the resulting file name
will be unique within the selected path. The current number will not be saved in the
save recall file but will be temporarily stored within the database. On subsequent saves
the number will be incremented.
Return values:
<Number> integer
Range:
0 to 999999
*RST: 0
Example: HCOP:FILE:AUTO:NUMB?
queries the number in the automatic file name.
Usage: Query only
Manual operation: See "File Options" on page 155
HCOPy Subsystem