R&S SMJ100A, Руководство по эксплуатации, Страница: 538 / 874

Remote Control Commands
R&S
®
SMJ100A
522 Operating Manual 1403.7458.32 ─ 14
Return values:
<Measure> select
Example: CAL:ALL:MEAS?
starts the adjustment of all functions for the entire instrument.
Response: "0"
adjustment has been performed successfully.
Usage: Query only
Manual operation: See "Adjust All" on page 131
:CALibration<hw>:FMOFfset[:MEASure]?
The command starts all adjustment for the FM/PhiM modulator.
Return values:
<Measure> 0 | 1
Example: CAL:FMOF?
starts the adjustments for the FM/Phim modulator.
Response: "0"
the adjustments have been performed successfully
Usage: Query only
Manual operation: See "Adjust FM Offset" on page 248
:CALibration<hw>:FREQuency[:MEASure]?
Starts all adjustments which affect the frequency.
Return values:
<Measure> 0 | 1
Example: CAL:FREQ:MEAS?
starts the adjustments for maximum frequency accuracy.
Response: "0"
the adjustments have been performed successfully.
Usage: Query only
Manual operation: See "Adjust Synthesis" on page 131
:CALibration<hw>:IQModulator:FULL?
Starts adjustment of the I/Q modulator for the entire frequency range. The I/Q modula-
tor is adjusted with respect to carrier leakage, I/Q imbalance and quadrature.
Return values:
<Full> 0 | 1
*RST:
0
CALibration Subsystem