R&S SMJ100A, Руководство по эксплуатации, Страница: 47 / 874

Preparing for Use
R&S
®
SMJ100A
31 Operating Manual 1403.7458.32 ─ 14
TRIGGER 1 / 2
TRIGGER 2
: Input for external triggering of digital modulations and standards and
ARB.
TRIGGER 1 : Rear Panel Connectors (option R&S SMJ-B81).
This options are recommended for use of the instrument in a 19" rack. Installing the
instrument in a 19" rack requires a rack adapter or an adapter for telescopic sliders
(refer to data sheet for Order No.).
See also Chapter 2.3.3, "Placing or Mounting the Instrument" , on page 33.
2.3 Putting into Operation
This section describes the basic steps to be taken when setting up the R&S SMJ for
the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury, or damage.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" delivered as a printed brochure
with the instrument.
In addition, read and observe the safety instructions in the following sections.
Notice that the data sheet may specify additional operating conditions.
Risk of instrument damage
Note that the general safety instructions also contain information on operating condi-
tions that will prevent damage to the instrument. The instrument's data sheet may con-
tain additional operating conditions.
Putting into Operation