R&S SMJ100A, Руководство по эксплуатации, Страница: 403 / 874

Instrument Function
R&S
®
SMJ100A
387 Operating Manual 1403.7458.32 ─ 14
"Next Segment
Seamless" The segment selected under "Next Segment" is output.
This mode is only available if all segments have the same sample
rate.
●
In the case of "Internal Trigger = Auto", output starts at once and
the segment is generated continuously.
If the segment is changed in "Next Segment", the new segment is
output seamlessly after the output of the current segment is com-
plete.
●
In the case of "internal Trigger = Armed_Auto", output starts after
the first trigger event. The segment is then generated continu-
ously.
If the segment is changed in"Next Segment", signal output is
stopped and the new segment is not output until a trigger occurs.
●
In the case of "External Trigger = Auto", output starts at once and
the segment is generated continuously.
Each trigger event switches over to outputting the subsequent
segment once the output of the current segment has been com-
pleted.
If the segment is changed in "Next Segment", the new segment is
output seamlessly after the output of the current segment is com-
plete.
●
In the case of "External Trigger = Armed_Auto", output starts after
the first trigger event. The segment is then generated continu-
ously.
Each trigger event switches over to outputting the subsequent
segment once the output of the current segment has been com-
pleted.
If the segment is changed in "Next Segment", signal output is
stopped and the new segment is not output until a trigger occurs.
The remaining trigger modes ("Retrigger" and "Armed_Retrigger") are
not available.
"Sequencer" The waveform files are processed according to the order and repeti-
tion cycles defined in the special sequencing list file (
*.wvs
)
assigned to the multi segment waveform file.
This “play list” is defined in the
Multi Segment Waveform Sequencing
dialog.
Note: This feature is disabled in case the segments in the multi seg-
ment waveform file have different clock rates.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:SMODe
on page 588
Next Segment Source
Displays the next segment source, internal or external, as selected with the parameter
"Trigger Source".
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:SOURce?
on page 627
Baseband Signal - Baseband Block