R&S SMJ100A, Руководство по эксплуатации, Страница: 295 / 874

Instrument Function
R&S
®
SMJ100A
279 Operating Manual 1403.7458.32 ─ 14
The pin assignment of the AUX I/O interface is shown in the "User Marker / AUX I/O
Configuration" menu; the assignment of the USER pins 2...4 and USER 1 BNC con-
nector can be changed.
Import/Export
Lists can be imported from externally created files or exported into text or CSV-files.
The import/export settings are available after clicking the "Import/Export" button.
Import/Export - List Mode
Expands the menu with the area for import and export of list mode files.
Externally edited Excel tables with frequency/level pairs can be imported as text or
CSV-files and used for list mode.
On the other hand, internally created list mode lists can be exported as text or CSV-
files.
Mode - List Mode
Selects if list mode lists should be imported or exported. The settings offered below
depend on the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE
on page 752
Extension - List Mode
Selects the file extension of the ASCII file to be imported or exported. Selection TXT
(text file) or CSV (Excel file) is available.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension
on page 749
Decimal Point - List Mode
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal
on page 751
RF Signal and Analog Modulations - RF Block