R&S SMJ100A, Руководство по эксплуатации, Страница: 170 / 874

Instrument Function
R&S
®
SMJ100A
154 Operating Manual 1403.7458.32 ─ 14
5.2.5 Generating a Hard Copy of the Display
The save/recall function enables you to store the settings in a file. In addition, you can
create a hard copy of the current display to save the most important settings of a per-
formed signal generation in an image file.
5.2.5.1 Hard Copy Settings
► To access the dialog, press the HCOPY key.
The dialog contains the parameters for configuring the output format and location
of a hardcopy.
The remote commands required to define the hard copy settings are described in
Chapter 7.11, "HCOPy Subsystem" , on page 532.
Destination
Indicates that the hardcopy is stored in a file (see also "File Options" on page 155).
Remote command:
:HCOPy:DEVice
on page 533
Options
Opens the "Hardcopy Options" dialog for configuring the corresponding parameters
(see
"File Options" on page 155.
Remote command:
n.a.
File
Some configuration parameters are already offered in the Hardcopy dialog. All configu-
ration parameters are available in
"File Options" on page 155.
Automatic Naming
Activates automatic generation of the file name. Automatic naming is configured in the
"Options…" sub dialog , see
"File Options" on page 155.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe
on page 539
General Instrument Settings