R&S SMJ100A, Руководство по эксплуатации

Страница: 168 / 874

Instrument Function
R&S
®
SMJ100A
152 Operating Manual 1403.7458.32 ─ 14
Accept
Applies the modified settings, provided the security password is entered correctly.
Note: This action can not be undone. Keep in mind, that a changed password is never
reset, even if you perform a factory preset.
5.2.3.17 Save/Recall
The "Save/Recall" submenu can also be called up with the FILE key and is therefore
described in the section of this key (see
Chapter 5.2.8, "Storing and Loading Instru-
ment Data - File Key" , on page 158).
5.2.3.18 Factory Preset
The "Factory Preset" dialog provides a function to reset the instrument's settings to
their factory state. This function is activated by pressing the "Execute Factory Preset"
button.
Factory Preset
Reset the instrument's settings to their factory state.
Note: Since Factory Preset resets the Remote Channel and network settings to the
default values, executing Factory Preset via remote control terminates the connection
to the instrument, if these settings had been configured to values different to the
default ones!
The factory preset function resets nearly all instrument settings. In addition to the regu-
lar preset by means of the PRESET key, a "Factory Preset" resets also the following
values:
●
Reference frequency settings ("Ref Oscillator" menu)
●
Power on settings ("Level/EMF" menu)
●
Network settings including hostname ("Setup" menu)
●
Remote Channel settings including GPIB address ("Setup" menu)
●
Start/Stop Display Update ("Setup" menu)
●
Display and keyboard settings ("Setup" menu).
To maintain security, password settings and all settings protected by these passwords
like disabled USB and LAN connections are not changed.
Not affected by the "Factory Preset" are also user data, lists or instrument settings
files, created for example by means of the Save/Recall function.
Remote command:
:SYSTem:FPReset
on page 489
General Instrument Settings