R&S SMB100A, Руководство по эксплуатации, Страница: 319 / 528

Remote Control Commands
R&S
®
SMB100A
304 Operating Manual 1407.0806.32 ─ 21
Table 7-1: List of the automatically assigned file extensions in the instrument
Function List type Contents File suffix
Instrument State Settings Instrument settings *.savrcltxt
"User Correction" List User-defined level correction values *.uco
Export Data
*.txt
or
*.csv
"List Mode" List User-defined frequency/level value pairs *.lsw
Export Data
*.txt
or
*.csv
"Pulse Train List" User-defined offtime/ontime/repetition values *.pulstrn
SMZ Settings Settings Data (firmware) of a connected SMZ frequency
multiplier *.efmfirm
NRP Settings Settings NRP Settings *.nrp
7.10.3 Examples
In these examples, the current instrument setting is stored in the file
test.savrcltxt
in the directory
/var/user/.
.
Storing and Loading Current Settings
1. Store the current setting in an intermediate memory with the number 4. This setting
can be called using command
*RCL
and the associated number of the memory, for
example
*RCL 4
.
*SAV 4
2. To store the settings in a file in a specific directory, specify the complete path.
MMEM:STOR:STAT 4,"/var/user/test.savrcltxt"
3. To store the settings in a file in the default drive, set the default drive and specify
only the file name.
MMEM:CDIR '/var/user/'*SAV 4
MMEM:STOR:STAT 4,"test.savrcltxt"
4. Load the file
test.savrcltxt
in the
user
directory.
MMEM:LOAD:STAT 4,'/var/user/test.savrcltxt'
5. Activate the instrument setting of the file
test.savrcltxt
.
*RCL 4
Working with Files and Directories
1. Read out all files in the specified directory.
MMEM:CAT? '/usb/user'
MMEMory Subsystem