Remote Control Commands
R&S
®
SGT100A
451
User Manual 1176.8674.02 ─ 07
Setting parameters:
<Filename>
"<filename>"
Filename or complete file path
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:IQ:DPD:SETTing:LOAD
<Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension
*.dpd
.
Setting parameters:
<Filename>
"<filename>"
Filename or complete file path
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:IQ:DPD:SETTing:STORe
<Filename>
Stores the current settings into the selected file; the file extension (
*.dpd
) is assigned
automatically.
Setting parameters:
<Filename>
"<filename>"
Filename or complete file path
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:IQ:DPD:AMAM:STATe
<State>
[:SOURce<hw>]:IQ:DPD:AMPM:STATe
<State>
Enabels/disables the AM/AM and AM/PM digital predistortion.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
See
Example "Defining correction coefficients and enabling digi-
Manual operation:
See
[:SOURce<hw>]:IQ:DPD:AMFirst
<AmAmFirstState>
Sets that the AM/AM predistortion is applied before the AM/PM.
SOURce Subsystem