Remote Control Commands
R&S
®
SGT100A
421
User Manual 1176.8674.02 ─ 07
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/ucor_imp'
selects that the ASCII file
ucor.csv
is imported into user cor-
rection list
ucor_imp
.
Manual operation:
See
[:SOURce<hw>]:CORRection:DEXChange:SELect
<Filename>
Selects the user correction list to be imported or exported.
The user correction files are stored with the fixed file extensions
*.uco
in a directory
of the user's choice. The directory applicable to the commands is defined with the com-
mand
MMEMory:CDIR
. A path can also be specified in command
SOUR:CORR:DEXC:SEL
, in which case the files are stored or loaded in the specified
directory.
Parameters:
<Filename>
string
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/import_ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/import_ucor_imp'
selects that the ASCII file
ucor.csv
is imported into user cor-
rection list
ucor_imp
.
Manual operation:
See
[:SOURce<hw>]:CORRection:CSET[:SELect]
<Filename>
Selects or creates a file for the user correction data.
If the file does not exist, the instrument automatically creates a new file with the name
you assigned. Note the predefined file extensions under
To determine the file location (directory/path) you can either enter it with the command
directly, or use the command
MMEMory:CDIR
.
To activate level correction use the command
.
Parameters:
<Filename>
<table name>
SOURce Subsystem