R&S SGT100A, Руководство пользователя

Страница: 152 / 593

Signal Generator Settings
R&S
®
SGT100A
121 User Manual 1176.8674.02 ─ 07
Current Range without Recalculation
Displays the dynamic range within which the delay of the marker signals can be set
without restarting the marker and signal.
The delay can be defined by moving the setting mark.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay:MINimum?
on page 357
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay:MAXimum?
on page 357
Fix marker delay to current range
Restricts the marker delay setting range to the dynamic range. In this range the delay
can be set without restarting the marker and signal.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut:DELay:FIXed
on page 365
7.1.3.4 Clock Settings
► To access this dialog, select "SGMA-GUI > Instrument Name > Baseband > ARB >
Marker".
In the "Clock Settings" section you can set the clock source and a delay if required.
Sync Mode
Selects the synchronization mode.
"None" The instrument is working in stand-alone mode.
"Sync Master" The instrument provides all connected instrument with its synchroni-
zation (including the trigger signal) and reference clock signal.
"Sync Slave" The instrument receives the synchronization and reference clock sig-
nal from another instrument working in a master mode.
"Sync Dig I/Q
In" The instrument receives the synchronization and reference clock sig-
nal from the DIGITAL I/Q connector.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:CLOCk:SYNChronization:MODE
on page 354
Baseband