Preparing for Use
R&S
®
SGS100A
11
Getting Started 1416.0570.02 ─ 11
●
Note the EMC classification in the data sheet
2.1.2
Unpacking and Checking the Instrument
Unpack the R&S
SGS carefully and check the contents of the package.
●
Check if all items listed on the delivery note, including this getting started
manual, are included in the delivery.
●
Check the R&S
SGS for any damage.
If the contents are damaged, immediately contact the carrier who delivered
the package.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift
or carry the instrument. Do not apply excessive force to the handles. If a
handle is ripped off, the falling instrument can cause injury.
2.1.3
Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Getting started printed manual
2.1.4
Placing or Mounting the Instrument
The R&S
SGS is designed for use under laboratory conditions, either on a bench
top or in a rack using a rack adapter kit (order number see data sheet).
Putting into Operation
