Instrument setup
R&S
®
RTO6
92
User Manual 1801.6687.02 ─ 05
Intensity
This value determines the strength of the waveform line in the diagram. Enter a per-
centage between 0 (not visible) and 100% (strong). The default value is 50%.
You can also use the [Intensity] knob on the left side of the screen to adjust the wave-
form intensity directly.
Note:
Use of color tables. The exact mapping of the cumulative value occurrences
according to the assigned color table is guaranteed only if the intensity is set to 50%.
All other intensity values falsify the mapping but can improve the visibility of the signal.
Remote command:
Waveform style
Select the style in which the waveform is displayed:
"Vectors"
The individual waveform points are connected by a line.
Define the strength of the line using the [Intensity] knob.
"Dots"
Only the individual waveform points are displayed. Waveform sample
points are the ADC sample points and additional interpolated points if
"Interpolated time" is used for resolution enhancement. To see the
dots of one waveform, perform one acquisition with [Single] and N=1
("Average count" = 1). During continuous acquisition, or a [Single]
acquisition with N > 1, the dots of multiple subsequent waveforms are
displayed on the screen, and the waveform looks like a line.
Consider also the
Remote command:
4.4.3
Backlight settings
Access: "Menu" > "Settings" > "Display" > "Backlight"
Display settings