Remote control commands
R&S
®
RTO6
1318
User Manual 1801.6687.02 ─ 05
Parameters:
<HighlightTime>
Range:
0.05 to 50
Increment: 0.1
*RST:
1
Default unit: s
Usage:
Asynchronous command
MTESt:COLor:UNMatch
<ClrUnmatchedMsk>
Sets the color of masks segments that were not hit.
Parameters:
<ClrUnmatchedMsk> Decimal value corresponding to the ARGB hex value that is
shown in the "Color" dialog box. ARGB is a 32-bit unsigned inte-
ger with alpha, red, green, blue word order. Alpha defines the
transparency.
To get the value, covert the hex value from the dialog to decimal
value.
Range:
0 (black) to 4294967295 (white)
Increment: 1
*RST:
2578098858
Usage:
Asynchronous command
MTESt:COLor:MATCh
<ClrMatchedPixel>
Sets the color of samples that violated the mask.
Parameters:
<ClrMatchedPixel>
Decimal value corresponding to the ARGB hex value that is
shown in the "Color" dialog box. ARGB is a 32-bit unsigned inte-
ger with alpha, red, green, blue word order. Alpha defines the
transparency.
To get the value, covert the hex value from the dialog to decimal
value.
Range:
0 (black) to 4294967295 (white)
Increment: 1
*RST:
4294901760
Usage:
Asynchronous command
MTESt:COLor:BORDer
<ClrMatchedMskBorder>
Sets the color of masks segments that were touched at the border. In this case, the
resolution is not sufficient to detect if the mask was really hit or not. Zoom into the con-
cerned area to see the actual result.
Instrument setup
