R&S RTO6, Руководство пользователя

Страница: 1240 / 2677

Network operation and remote control
R&S
®
RTO6
1240 User Manual 1801.6687.02 ─ 05
b) On the "Local Resources" tab:
● To use printers connected to the remote PC while accessing them from the
instrument, activate "Printers" under "Local devices and resources".
● If you want access drives of the remote PC from the instrument, e.g. to
store settings or to copy files from the PC to the instrument:
–
Select "More" under "Local devices and resources".
– Select the "Drives" that are needed.
Windows maps the selected drives of the remote PC to corresponding
network drives. When a connection is established, a warning on the PC
indicates that the drives are enabled for access from the instrument.
c) On the "Display" tab:
● Use the slider to set the size of the R&S RTO6 window on the remote PC
desktop.
● Activate "Display the connection bar when in full screen mode".
A bar with the network address of the instrument is displayed on the
screen, which you can use to reduce, minimize or close the window.
d) On the "General" tab, you can save the connection settings for later use: click
"Save As".
Terminating Remote Desktop Control
A Remote Desktop connection can be terminated either on the R&S RTO6 or on the
remote PC. The connection can be established again any time as long as remote con-
trol is enabled on the instrument. Consider the notice
"Risk of unauthorized access"
on page 1238.
► To terminate the connection on the remote PC, close the "Remote Desktop" win-
dow, or select "Start > Disconnect".
22.5 Remote control
Remote control automates the operation of the instrument using SCPI commands,
scripts and programs.
For general information on remote control of Rohde & Schwarz products via SCPI,
refer to www.rohde-schwarz.com/rc-via-scpi .
The following sections describe the instrument-specific basics of remote control. SCPI
commands are listed described in chapter "Remote Control Commands".
● Remote control interfaces and protocols .............................................................1241
● Remote settings .................................................................................................. 1242
● Starting and stopping remote control .................................................................. 1244
● Remote control - status reporting system ........................................................... 1245
Remote control