Instrument Setup
R&S
®
RTM2000
48
Getting Started 1317.4710.02 ─ 05
6 Instrument Setup
6.1 Defining General Instrument Settings
This chapter describes how to define general instrument settings.
6.1.1 Setting Data and Time
Year, month, day, hour and minute can be set individually.
1. Press SETUP > "Date & Time".
2. Press "Year".
3. Select the current year using the NAVIGATION knob.
4. Press "Month".
5. Select the current month using the "Navigation" knob.
6. Set "Day", "Hour", and "Minute" in the same way.
7. Press "Accept" to save the changed date and time on the instrument.
6.1.2 Configuring Sounds
You can define the event types for which a sound is to be generated by the instrument.
1. Press SETUP > "Sound".
2. Press the softkey for the event types for which a sound is to be generated. Active
sounds are highlighted. The following event types are available:
●
Control Beep
: Generates a sound for general control events, e.g. reaching the
rotary encoder end or changing the measuring mode in the "Auto Measure"
menu.
●
Error Beep
: Generates a a sound if an error occurs in the instrument, e.g.
when the input exceeds 50
Ω
or a false value is entered in a dialog.
●
Trigger Beep
: Generates a sound when the trigger condition is fulfilled.
6.1.3 Setting the Language
You can change the language of the softkey labels and other information displayed on
the screen with a single softkey. A reboot of the instrument is not necessary.
Supported languages are listed in the data sheet.
Defining General Instrument Settings
