Remote Commands Reference
R&S
®
RTC1000
219
User Manual 1335.7352.02 ─ 04
Parameters:
<State>
ON | OFF
*RST:
OFF
CURSor<m>:X1Position
<Xposition1>
Specifies the position of the first cursor on the time axis.
Parameters:
<Xposition1>
Default unit: s
CURSor<m>:X2Position
<Xposition2>
Specifies the position of the second cursor on the time axis.
Parameters:
<Xposition2>
Default unit: s
CURSor<m>:X3Position
<Xposition3>
Specifies the position of the third cursor on the time axis for the Ratio X measurement.
Parameters:
<Position>
Default unit: s
CURSor<m>:Y1Position
<Yposition1>
Specifies the position of the first horizontal cursor on the y-axis.
Parameters:
<Yposition1>
Default unit: V
CURSor<m>:Y2Position
<Yposition2>
Specifies the position of the second horizontal cursor on the y-axis.
Parameters:
<Yposition2>
*RST:
V
CURSor<m>:Y3Position
<Yposition3>
Specifies the position of the third horizontal cursor on the y-axis for Ratio Y measure-
ments.
Parameters:
<Position>
Default unit: V
Measurements