manualshive.com logo in svg

R&S RTC1000, Руководство пользователя, Страница: 247 / 371

Поделиться
Скачать
R&S RTC1000 Скачать руководство пользователя страница 247

Remote Commands Reference

R&S

®

RTC1000

247

User Manual 1335.7352.02 ─ 02

Parameters:

<Yout>

ON | OFF
*RST: 

OFF

MASK:ACTion:SOUNd:EVENt:MODE 

<EventMode>

MASK:ACTion:STOP:EVENt:MODE 

<EventMode>

MASK:ACTion:PULSe:EVENt:MODE 

<EventMode>

MASK:ACTion:SCRSave:EVENt:MODE 

<EventMode>

MASK:ACTion:PRINt:EVENt:MODE 

<EventMode>

MASK:ACTion:WFMSave:EVENt:MODE 

<EventMode>

Defines when and how often the action will be executed.

●

SOUNd:

 Generates a beep sound on mask violation.

●

STOP:

 Stops the waveform acquisition on mask violation.

●

PULSe:

 Emits an impulse.

●

SCRSave:

 Saves a screenshot according to printer output settings.

●

PRINt:

 Prints a screenshot to a printer connected to the USB connector on the

front panel.

●

WFMSave:

 Saves the waveform data according to the screenshot output settings.

Parameters:

<EventMode>

OFF | EACH

OFF

No action is executed.

EACH

The selected action is executed on each violation of the mask.
*RST: 

OFF

MASK:ACTion:STOP:EVENt:COUNt 

<EventCount>

Sets the number of mask violations after which the action is executed.

Parameters:

<EventCount>

Integer value, number of mask violations

MASK:ACTion:SCRSave:DESTination 

<File>

Defines the path and filename for a screenshot that will be saved on mask violation.
The file format is PNG, the filename is incremented automatically

Parameters:

<File>

String parameter

Example: 

MASK:ACT:SCRS:DEST "/USB_FRONT/MASKS/VIOL"

On first violation, the screeenshot is saved to 

VIOL.PNG

, on

second violation to 

VIOL01.PNG

, the third to 

VIOL02.PNG

 ...

Masks

Содержание RTC1000




















































































































































































































































































































































































Отзывы:

Нет отзывов