manualshive.com logo in svg

R&S RTC1000, Руководство пользователя, Страница: 190 / 371

Поделиться
Скачать
R&S RTC1000 Скачать руководство пользователя страница 190

Remote Commands Reference

R&S

®

RTC1000

190

User Manual 1335.7352.02 ─ 02

Return values: 

<DataHeader>

Comma-separated value list.
Example: 

-9.477E-008,9.477E-008,1200,2

Usage: 

Query only

CHANnel<m>:DATA:ENVelope:XINCrement?

Returns the time difference between two adjacent samples of the indicated waveform.
The command is relevant for data conversion, if binary data format is defined (FORM
UINT,8|16|32).

Suffix: 

<m>

.

Selects the input channel (1, 2).

Return values: 

<Xincrement>

Time in s.

Usage: 

Query only

CHANnel<m>:DATA:ENVelope:XORigin?

Returns the time of the first sample of the indicated waveform. The command is rele-
vant for data conversion, if binary data format is defined (FORM UINT,8|16|32).

Suffix: 

<m>

.

Selects the input channel (1, 2).

Return values: 

<Xorigin>

Time in s.

Usage: 

Query only

CHANnel<m>:DATA:ENVelope:YINCrement?

Returns the voltage value per bit of the indicated waveform. The command is relevant
for data conversion, if binary data format is defined (FORM UINT,8|16|32).

Suffix: 

<m>

.

Selects the input channel (1, 2).

Return values: 

<Yincrement>

Voltage in V.

Usage: 

Query only

CHANnel<m>:DATA:ENVelope:YORigin?

Returns the voltage value for binary value 0 of the indicated waveform. The command
is relevant for data conversion, if binary data format is defined (FORM UINT,8|16|32).

Suffix: 

<m>

.

Selects the input channel (1, 2).

Acquisition and Setup

Содержание RTC1000




















































































































































































































































































































































































Отзывы:

Нет отзывов