Remote control commands
R&S
®
RTA4000
683
User Manual 1335.7898.02 ─ 08
TRIGger:A:MILStd:DATA:CONDition
<Compare>
For a data word, sets the triggering condition for the comparison of the decoded value
to the defined range.
Parameters:
<Compare>
EQUal | NEQual | GTHan | GEQual | LEQual | LTHan | WITHin |
OUTSide
*RST:
OFF
TRIGger:A:MILStd:DATA:MAXimum
<DataMinimum>
For a data word, sets the maximum data value.
Parameters:
<DataMinimum>
01X-string
TRIGger:A:MILStd:DATA:MINimum
<DataMinimum>
For a data word, sets the minimum data value.
Parameters:
<DataMinimum>
01X-string
TRIGger:A:MILStd:DATA:OFFSet
<DataOffset>
For a data word sets the word offset to be triggered on.
Parameters:
<DataOffset>
*RST:
0
TRIGger:A:MILStd:DATA:OFFSet:CONDition
<DataOffset>
For a data offset, sets the triggering condition for the comparison of the decoded value
to the defined range.
Parameters:
<DataOffset>
EQUal | NEQual | GTHan | GEQual | LEQual | LTHan
*RST:
0
TRIGger:A:MILStd:DATA:WORDs
<DataWords>
For a data word sets the number of words to be triggered on.
Parameters:
<DataWords>
*RST:
1
TRIGger:A:MILStd:ERRor:MANChester
<ErrorEnable>
Enables/disables triggering if there is an error in the Manchester coding of the signal.
Serial bus analysis