R&S OSP Series, Начало работы

Страница: 30 / 37

Trying Out the Switch Unit
R&S
®
OSP
30 Getting Started 1178.7117.02 ─ 03
For connecting external devices, see Figure 6-4 .
6.1.2 Manual Remote Operation
You can control one or more switch units by working with the user interface in a
web browser ("Web GUI") on a remote computer that is connected via LAN.
Figure 6-2: Manual remote operation via "WebGUI" and LAN
RJ45 = Ethernet (LAN) connector on the rear panel of each switch unit
Refer to the User Manual for more information, also regarding the combination of
several switch units in a master-slave setup.
Note that the legacy software R&S OSP Panel is not compatible with the
switch units R&S OSP220, R&S OSP230 and R&S OSP320.
6.1.3 Remote Operation by SCPI Commands
You can control the R&S OSP by SCPI commands sent from a remote computer
that is connected via LAN. Refer to the User Manual.
Figure 6-3: Remote operation by SCPI commands
RJ45 = Ethernet (LAN) connector on the rear panel of each switch unit
Far left = Two switch units integrated in a test system like R&S CEMS
Manual and Remote Modes of Operation