R&S NRX-B4, Руководство пользователя

Страница: 16 / 450

Instrument Tour
R&S
®
NRX
16 User Manual 1178.5566.02 ─ 05
3.1.3 Touchscreen
See (3) in Figure 3-1 .
The R&S NRX displays results in panes. Depending on the measurement mode, val-
ues are displayed digitally or graphically.
False triggers of the touch panel in the presence of static electricity
If an object (e.g. a human finger) that is charged with static electricity is brought near
the touch panel, false triggers can occur.
This behavior is caused by the principle of operation of a PCAP (projected capacitive)
touch panel.
Further information:
●
"Using the touchscreen" on page 29
3.1.4 Keys
See (4) in Figure 3-1 .
[Esc] / Local
If you press shortly:
●
Changes to the next-higher hierarchy level.
●
Escapes from the entry mode in text boxes and lists.
●
Closes dialogs without losing any entries that have been made.
●
Switches from remote control mode (all controls disabled) to manual operation.
If you press and hold:
●
Goes to the start dialog that shows an overview of the active measurements.
See
Chapter 5.1.1, "Start Dialog" , on page 29.
Further information:
●
"Going back to a higher hierarchy level" on page 29
●
Chapter 5.3.2, "Returning to Manual Operation (LOCAL)" , on page 40
Screenshot
Creates a screenshot of the current display.
See Chapter 5.1.8, "Creating and Saving Screenshots" , on page 38.
Remote command:
SYSTem:HCOPy
on page 206
[1Trig] / Delete
Front Panel Tour