R&S NRX-B4, Руководство пользователя

Страница: 154 / 450

System Settings
R&S
®
NRX
154 User Manual 1178.5566.02 ─ 05
On this tab, you can test whether the user interfaces are in working order and create
information useful for troubleshooting.
For testing a connected power sensor, see "Sensor Test" on page 142.
Testing the user interfaces
1. Tap the test you want to perform.
A dialog with detailed test instructions is displayed.
2. Read and follow the instructions.
3. Exit the test with PASS or FAIL.
Note: "Exit with PASS" only becomes available when the test is finished success-
fully.
The results, passed or failed, are displayed for each test.
Remote command:
●
TEST:DEVice[:ALL]
on page 345
Creating information for troubleshooting
1. If you want to save the information on a memory stick, connect a USB stick
(FAT32).
2. Tap "Create R&S Support Information".
An archive file (
*.tar.gz
) is created containing the following information:
● Software errors
● Hardware status
● Current device footprint
● Current device settings
If a memory stick is connected, the archive file is saved there.
Alternatively, you can transfer the information using secure shell (SSH). See
"SSH"
on page 148.
12.5 Global Settings
Access: [System] > "Global Settings"
Global Settings