R&S NRP Series, Руководство пользователя

Страница: 84 / 161

Remote control commands
R&S
®
NRPxxA(N)
84 User Manual 1177.6017.02 ─ 08
The minimum value is implemented for fast unchopped continuous average measure-
ments. See also
Chapter 10.2.2, "Triggered fast unchopped continuous average mea-
surement" , on page 126.
Parameters:
<integration_time> Range: 8.0e-6 to 2.00
*RST: 0.02
Default unit: Seconds
Manual operation: See "Aperture Time" on page 44
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:CLEar
Clears the contents of the result buffer in continuous average mode.
Example: BUFF:CLE
Usage: Event
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:COUNt?
Available in continuous average mode.
Queries the number of results that are currently stored in the result buffer.
Example: BUFF:COUN?
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:DATA?
Queries the results of the continuous average result buffer and returns them even if the
buffer is not full.
In contrast,
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
returns a result only if
the buffer is full.
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE <count>
Sets the size of the result buffer in continuous average mode.
You can enable the buffer using
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:
STATe
.
Parameters:
<count> Range: 1 to 8192
*RST: 1
Example: BUFF:SIZE 1
See Chapter 10.3, "Performing a buffered continuous average
measurement" , on page 127.
Configuring the measurement modes