Remote Control Commands
R&S
®
NGL200/NGM200
92
User Manual 1178.8736.02 ─ 06
Usage:
Setting only
SYSTem:RWLock
Sets the system to remote state. The front panel control is locked and a message box
is shown on the instrument display. You are only able to unlock the front panel control
via SCPI command SYSTem:LOCal.
Usage:
Setting only
SYSTem:KEY:BRIGhtness
<brightness>
SYSTem:KEY:BRIGhtness?
Sets or queries the front panel key brightness.
Parameters:
<brightness>
Sets the key brightness.
Range:
0.0 to 1.0
Increment: 0.1
*RST:
1.0
Example:
SYSTem:KEY:BRIGhtness 1.0
SYSTem:KEY:BRIGhtness?
-> 1.0
Returns key brightness value: 1.0.
SYSTem:DATE
<year>, <month>, <day>
SYSTem:DATE?
Sets or queries the system date.
Parameters:
<year>
Sets year of the date.
<month>
Sets month of the date.
<day>
Sets day of the date.
Example:
SYSTem:DATE 2018, 10, 15
SYSTem:DATE?
-> 2018, 10, 15
Returns the system date.
SYSTem:TIME
<hh>, <mm>, <ss>
SYSTem:TIME?
Sets or queries the system time.
Parameters:
<hh>
Sets the hours of the system time.
<mm>
Sets the minutes of the system time.
<ss>
Sets the seconds of the system time.
System Settings Commands
