manualshive.com logo in svg

R&S M3SR 4100 Series, Руководство по эксплуатации, Страница: 527 / 706

Поделиться
Скачать
R&S M3SR 4100 Series Скачать руководство пользователя страница 527

Operating Manual 6175.4760.02 – 01

4.191

M3SR Series 4100

Configuring the Vocoder

4.8.4.9

Configuring the Vocoder

By means of softkey 'VOC' (vocoder) the operator can select the mode for data transmission 
with INT VOCODER being selected as port to be configured (see 
sect. 4.8.3.3 Selecting the Service Mode).

Softkey

Selection / Editor

Description

Listbox

The currently used vocoder is displayed in the 
central area.

1.

Press softkey 'Internal Vocoder'.

2.

Select desired vocoder from listbox.

3.

Press 'ENT' to confirm.

The new selection is now effective.

Possible values:

MELP 600

MMBE 1k2

MELP 2k4

MMBE 2k4

AMBE 2k4

Default value:

MMBE 1k2

•

The MMBE (Mixed Multiband Excitation – 
Linear Predictive Coding) vocoder with 
FEC (Forward Error Correction) is used in 
SECOM-H mode and provides a code rate 
2400 bit/s.

•

The MELP (Mixed Excitation Linear Pre-
diction) vocoder is used in SECOM-H 
mode and provides code rates of 600 bit/s 
and 2400 bit/s.

•

The AMBE (Advanced Multiband Excita-
tion) vocoder is used in SECOM-H mode 
and provides code rates of 2400 bit/s.

Содержание M3SR 4100 Series



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов