R&S FSW Series, Руководство пользователя

Страница: 828 / 1450

Remote Commands
R&S
®
FSW
828 User Manual 1173.9411.02 ─ 43
Setting parameters:
<ChannelName1> String containing the name of the channel you want to rename.
<ChannelName2> String containing the new channel name.
Note that you cannot assign an existing channel name to a new
channel; this will cause an error.
Channel names can have a maximum of 31 characters, and
must be compatible with the Windows conventions for file
names. In particular, they must not contain special characters
such as ":", "*", "?".
Example:
INST:REN 'IQAnalyzer2','IQAnalyzer3'
Renames the channel with the name 'IQAnalyzer2' to 'IQAna-
lyzer3'.
Usage: Setting only
Manual operation: See "Changing the Channel Name" on page 87
INSTrument[:SELect] <ChannelType> | <ChannelName>
This command activates a new channel with the defined channel type, or selects an
existing channel with the specified name.
Also see
●
INSTrument:CREate[:NEW]
on page 824
●
Chapter 14.4.3, "Programming Example: Performing a Sequence of Measure-
ments"
, on page 831
Parameters:
<ChannelType> Channel type of the new channel.
For a list of available channel types see
INSTrument:LIST?
on page 825.
<ChannelName> String containing the name of the channel.
Example: INST IQ
Activates a channel for the I/Q Analyzer application (evaluation
mode).
INST 'MyIQSpectrum'
Selects the channel named 'MyIQSpectrum' (for example before
executing further commands for that channel).
Selecting the Operating Mode and Application