Getting Started
R&S
®
FSMR3000
74
User Manual 1179.0116.02 ─ 02
Table 4-11: Correlation of mouse and touch actions
Mouse operation
Touch operation
Click
Tap
Double-click
Double-tap
Click and hold
Touch and hold
Right-click
Touch, hold for 1 second and release
Drag-&-drop (= click and hold, then drag and
release)
Touch, then drag and release
Mouse wheel to scroll up or down
Swipe
Dragging scrollbars to scroll up or down, left or right
Swipe
In (graphical) Zoom mode only: dragging the bor-
ders of the displayed rectangle to change its size
Touch, then drag and release
Example:
You can scroll through a long table in conventional mouse operation by clicking in the
table's scrollbar repeatedly. In touch operation, you would scroll through the table by
dragging the table up and down with your finger.
4.5.5
Displaying Results
The R&S
FSMR3 provides several instrument applications for different analysis tasks
and different types of signals, for example the Measuring Receiver application, the
Spectrum application or the I/Q Analyzer. For each application, a new measurement
channel is created and displayed in a separate tab on the screen.
The results of a measurement channel can be evaluated in many different ways, both
graphically and numerically. For each evaluation method the results are displayed in a
separate window in the tab.
The R&S
FSMR3 allows you to configure the display to suit your specific requirements
and optimize analysis.
4.5.5.1
Activating and Deactivating Channels
When you activate an application, a new measurement channel is created which deter-
mines the measurement settings for that application. The same application can be acti-
vated with different measurement settings by creating several channels for the same
application. Whenever you switch channels, the corresponding measurement settings
are restored. Each channel is displayed in a separate tab on the screen.
An additional tab ("MultiView") provides an overview of all currently active channels at
once.
Operating the Instrument
