R&S FSMR3000, Руководство пользователя

Страница: 649 / 733

Remote Commands
R&S
®
FSMR3000
649 User Manual 1179.0116.02 ─ 02
Return values:
<Messages> String containing all messages of the selected type for the speci-
fied channel. Each message is separated by a comma and
inserted in parentheses. If no messages are available, empty
parentheses are returned.
Example: SYST:ERR:EXT? ALL
Returns all messages for the currently active application, e.g.
"Message 1","Message 2" .
Example: SYST:ERR:EXT? FAT,'Spectrum2'
Queries fatal errors in the 'Spectrum2' application. If none have
occurred, the result is:
" " .
Usage: Query only
DIAGnostic:SERVice:INPut:MC[:DISTance] <Bandwidth>
This command selects the distance of the peaks of the microwave calibration signal for
calibration of the YIG filter.
Parameters:
<Bandwidth> WIDE | SMALl
SMALl
Small offset of combline frequencies.
WIDE
Wide offset of combline frequencies.
Manual operation: See "Calibration Frequency MW" on page 305
12.11 Emulating Other Instruments' Commands
The R&S FSMR3 analyzer family supports a subset of the GPIB commands of several
HP and PSA instruments.
For details see Chapter 11.3, "GPIB Languages" , on page 335.
● Setting up Instrument Emulation ...........................................................................649
● Reference: GPIB Commands of Emulated HP Models .........................................652
● Reference: Command Set of Emulated PSA Models ............................................680
● Reference: Command Set of Emulated PXA Models ............................................684
12.11.1 Setting up Instrument Emulation
The following commands are required to set up the use of commands to emulate other
instruments.
Useful commands for emulating other instruments described elsewhere:
●
SYSTem:REVision:FACTory
on page 611
Emulating Other Instruments' Commands