Getting Started
R&S
®
FSMR3000
51
User Manual 1179.0116.02 ─ 02
Figure 4-20: Enlarged zoom window
4.4.8
Zooming into the Display Permanently
Chapter 4.4.7, "Zooming into the Display"
on page 48 were
only graphical changes to the display. Now we would like to change the measurement
settings such that the zoomed result is maintained permanently. We will demonstrate
this in the Spectrum channel.
1. Tap the "Spectrum" tab.
2. Double-tap the diagram close to the peak of the measurement.
A peak marker (M1) is inserted at the detected peak.
Trying Out the Instrument